COMPUTRE AIDE MANUFACTURING

instructions 24 questions

1- To organize geometry before creating a new feature, solid, or geometry for a toolpath.

A- create a level

B- create a wireframe

C- create a parameter

D- create a plane

2- When using Solid Extrude, the direction of the extrude is—————-

A- negative

B- to the left

C- positive

D- to the right

3-Which Solid Extrude type should be used to hollow out or slice through a solid?

A- slice image

B- hollow slice

C- cut part

D- cut body

4- Math calculations can be performed in the Circle Radius or Diameter field?

True

False

5- When using line parallel, you can input a distance from the original line when creating the parallel line.

True

False

6- What function can change the depth of existing geometry?

A-Analyze Line

B-Analyze Distance

C-Transform

D-Translate

7- In the wireframe tab, if you set the trim/break extend function is set to divide/delete, you select on the section of geometry that you do not want to divide or delete.

True

False

8- The total depth of a tool is controlled through which parameter?

A- linking

B- G74

C- distance

D- deth of cut

9- Material is defined in Mastercam

A- in G51

B- in tool settings

C- in post processing

D- in stock setup

10- A Finish toolpath executes at a slower feed rate than a roughing path.

True

False

11- The button on the HAAS CNC that allows the operator to move the machine axis is

A- axis offset

B- Shift

C- hand jos

D- F2

12- Power up re-start sets a CNC machine A- at

A- machine zero

B- stock negative

C- part zero

D- machine positive

Q13) In MasterCAM if a simulation does not run as expected.

A- post g-code

B-back plot

C-verify

D- change parameters

14- Software that creates specific tool path data for a specific machine.

A- CAD

B- coordinate compiler

C- interpolation

D- post processor

15- G-code programming method that does not require trigonometry functions during hand program writing.

A-cartesian

B- polar

C- incremental

D- absolutc

16- The orgin of a CAM drawing is known as———————–

A- program reference zero

B- M 30

C- G 90

D- G 25

17- The smallest movement the axis drive of a CNC machine is able to make is called

A- axis measurement

B-step differential

C- incremental

D- resolution

18- When single block mode is turned on only the 3 lines of G-code are executed at a time

True

False

19- Use the planes manager to generate, sort, edit, regenerate, verify, backplot, and post any operation.

True

False

20- A 2-D chamfer is used to remove a wire edge

True

False

21- The MasterCAM function translate is used to locate part zero on a drawing

True

False

22- Ballscrews are designed to have at least 0.125″ backlash.

True

False

23- T8 in G-code means change to tool #4

True

False

24- This MasterCAM function reviews tool motion relative to the part geometry.

A-verify

B- backplot

C- gencrato

D- G1